Šta tražite?

Unesi pojam pretrage

Žao nam je!

Nije pronađen nijedan rezultat pretrage.

Prijavljivanje

Zaboravili ste vašu lozinku?

Novi ste kupac?

Registrujte se i osigurajte sebi mnoge prednosti:

Provera raspoloživosti proizvoda
Brza porudžbina i istorija porudžbine
Lične preporuke za proizvod
Plaćanje prema računu
Registrujte se sada

Help & Contact

Your direct line to us

If you have any questions about the online store or our products, you can call our customer service at:

Phone
+49-421-48907-766
Monday - Thursday: 8:00AM - 5:00PM
Friday: 8:00AM - 4:00PM
Except saturdays, sundays and holidays

Or use our FAQ

There you get answers to the most frequently asked questions.

Helping people help themselves
Najčešća pitanja

KTF 332

PTFE-Glattschlauch DN032, 3 Umflecht. ST
KTF332

The product image may differ

KTF332
KTF332 KTF332
Inside Ø
31.9 mm
Outside Ø
39.3 mm
Bend radius min.
280 mm
PDF preuzimanje

Izaberite izvršenje

Prikaz tabele s artiklima

Artikal

KTF 306 KTF 308 KTF 310 KTF 313 KTF 316 KTF 320 KTF 325 KTF 332
Detalji proizvoda za

KTF 332

Inside Ø
31.9 mm
Outside Ø
39.3 mm
Bend radius min.
280 mm
Burst pressure
1,000 bar
Test pressure
375 bar
Weight per m
1.56 kg
Working pressure 20 °C (stat.)
250 bar
Sva svojstva

Svojstva

Application
  • high-pressure applications with different media, 2-component glue and aggressive media 
Application
  • mainly for the adhesive industry, surface treatment, heater hose systems. 
Approval
  • The base material has an FDA-approval, EG 1935/2004 and EU 10/2011. 
Braiding
  • two-braided of steel wire, bronzed, one layer of steel wire galvanised 
Design
  • smooth inliner in white PTFE 
  • thick-walled 
Features
  • smooth inner liner 
Hose material
  • PTFE (Polytetrafluoroethylene) 
Temp.
  • applies only to the hose 
Temp. max.
  • 200 °C
Temp. min.
  • -70 °C
Sva svojstva

Opis proizvoda

Napomene
The pressure values listed apply to hoses only.
The pressure reduction factor must be taken into account from 50 °C.
(Max. working pressure = working pressure x factor)
Temp.: 100 °C / 150 °C / 200 °C
Factor: 0.95 / 0.90 / 0.83
If the hose assembly is being used as steam hose, the maximum operating pressure is 14 bar (203 psi) and the temperature +250 °C (+482 °F)
Temperature correction factors water vapour:
Temp.: 20 °C / 100 °C / 150 °C / 200 °C
Factor: 1.0 / 0.95 / 0.90 / 0.83.
With dynamic load the bend radius should be doubled at minimum. The radius should be adapted according to the conditions.
KTF-hoses do not have a cover and wires are not corrosion-protected. The usage as a sole hose assembly without measures, which excludes corrosion of the wires, is not permitted due to possible risk of injuries and can lead to failure of the hose assembly.
Napomena za porudžbinu
Other designs available on request

Product variants

8 Results
Search
Prikaz crteža s dimenzijama
Opis
Bend radius min. (mm)
Burst pressure (bar)
Inside Ø (mm)
Outside Ø (mm)
Detalji / Meter
KTF 306
60 mm
2,000 bar
6.2 mm
11.2 mm
Saznajte više
KTF 308
85 mm
1.900 bar
8 mm
13,4 mm
Saznajte više
KTF 310
110 mm
1.900 bar
10 mm
15,7 mm
Saznajte više
KTF 313
150 mm
1.800 bar
12,2 mm
18,8 mm
Saznajte više
KTF 316
175 mm
1.600 bar
15,1 mm
21,6 mm
Saznajte više
KTF 320
200 mm
1.200 bar
20,2 mm
27,8 mm
Saznajte više
KTF 325
240 mm
1.100 bar
24,2 mm
31,7 mm
Saznajte više
KTF 332
280 mm
1.000 bar
31,9 mm
39,3 mm
Saznajte više

Column selection

Bend radius min. (mm)
Burst pressure (bar)
Inside Ø (mm)
Outside Ø (mm)
Test pressure (bar)
Weight per m (kg)
Working pressure 20 °C (stat.) (bar)