The product image may differ
Unutrašnji-Ø nom.
20,2 mm
Spoljni-Ø nom.
27,8 mm
Kontrolni pritisak
450 bar
Product details for
KTF 320
Unutrašnji-Ø nom.
20,2 mm
Spoljni-Ø nom.
27,8 mm
Kontrolni pritisak
450 bar
Radni pritisak 20°C (stat.)
300 bar
Razorni pritisak
1.200 bar
Težina po metru
1,055 kg
min. radijus savijanja
200 mm
All characteristics
Characteristics
Dozvola
- The base material has an FDA-approval, EG 1935/2004 and EU 10/2011.
Materijal creva
- PTFE (politetrafluoretilen)
Oblast primene
- mainly for the adhesive industry, surface treatment, heater hose systems.
Osobine
- smooth inner liner
Pletivo
- dva pletiva od čelične žice, mesingane, jedan sloj žice je pocinkovan.
Primena
- high-pressure applications with different media, 2-component glue and aggressive media
Temperatura
- važi za crevo
Temperatura maks.
- 200 °C
Temperatura min.
- -70 °C
Verzija
- Umetak gladak od belog PTFE
- sa debelim zidovima
All characteristics
Opis proizvoda
Notes
The pressure reduction factor must be taken into account from 50 °C.
(Max. working pressure = working pressure x factor)
Temp.: 100 °C / 150 °C / 200 °C
Factor: 0.95 / 0.90 / 0.83
If the hose assembly is being used as steam hose, the maximum operating pressure is 14 bar (203 psi) and the temperature +250 °C (+482 °F)
Temperature correction factors water vapour:
Temp.: 20 °C / 100 °C / 150 °C / 200 °C
Factor: 1.0 / 0.95 / 0.90 / 0.83.
With dynamic load the bend radius should be doubled at minimum. The radius should be adapted according to the conditions.
KTF-hoses do not have a cover and wires are not corrosion-protected. The usage as a sole hose assembly without measures, which excludes corrosion of the wires, is not permitted due to possible risk of injuries and can lead to failure of the hose assembly.
Ordering information
Product variants
8 Results
Search
Show dimensional drawing
Identifier
Column selection
Inside Ø (mm)
Outside Ø (mm)
Bend radius min. (mm)
Burst pressure (bar)
Test pressure (bar)
Weight per m (kg)
Working pressure 20 °C (stat.) (bar)