Što tražite?

Unesi pojam za pretragu

Žao nam je!

Nisu pronađeni rezultati pretrage.

Prijava

Vi ste novi kupac?

Registrirajte se i osigurajte mnogobrojne prednosti:

Provjera raspoloživosti proizvoda
Brza dodatna narudžba i povijest narudžbi
Osobne preporuke proizvoda
Plaćanje temeljem računa

Help & Contact

Your direct line to us

If you have any questions about the online store or our products, you can call our customer service at:

Monday - Thursday: 8:00AM - 5:00PM
Friday: 8:00AM - 4:00PM
Except saturdays, sundays and holidays

Or use our FAQ

There you get answers to the most frequently asked questions.

Helping people help themselves
Često postavljana pitanja

KTF 308

PTFE-Hose, smooth DN08, 3 braid, ST
Inside Ø
8 mm
Outside Ø
13.4 mm
Bend radius min.
85 mm
Preuzimanje PDF-a
Detalji o proizvodu za

KTF 308

Inside Ø
8 mm
Outside Ø
13.4 mm
Bend radius min.
85 mm
Burst pressure
1,900 bar
Test pressure
712.5 bar
Weight per m
0.345 kg
Working pressure 20 °C (stat.)
475 bar
Sva svojstva

Svojstva

Application
  • high-pressure applications with different media, 2-component glue and aggressive media 
Application
  • mainly for the adhesive industry, surface treatment, heater hose systems. 
Approval
  • The base material has an FDA-approval, EG 1935/2004 and EU 10/2011. 
Braiding
  • two-braided of steel wire, bronzed, one layer of steel wire galvanised 
Design
  • smooth inliner in white PTFE 
  • thick-walled 
Features
  • smooth inner liner 
Hose material
  • PTFE (Polytetrafluoroethylene) 
Temp.
  • applies only to the hose 
Temp. max.
  • 200 °C
Temp. min.
  • -70 °C
Sva svojstva

Opis proizvoda

Napomene
The pressure values listed apply to hoses only.
The pressure reduction factor must be taken into account from 50 °C.
(Max. working pressure = working pressure x factor)
Temp.: 100 °C / 150 °C / 200 °C
Factor: 0.95 / 0.90 / 0.83
If the hose assembly is being used as steam hose, the maximum operating pressure is 14 bar (203 psi) and the temperature +250 °C (+482 °F)
Temperature correction factors water vapour:
Temp.: 20 °C / 100 °C / 150 °C / 200 °C
Factor: 1.0 / 0.95 / 0.90 / 0.83.
With dynamic load the bend radius should be doubled at minimum. The radius should be adapted according to the conditions.
KTF-hoses do not have a cover and wires are not corrosion-protected. The usage as a sole hose assembly without measures, which excludes corrosion of the wires, is not permitted due to possible risk of injuries and can lead to failure of the hose assembly.
Napomena o narudžbi
Other designs available on request

Product variants

8 Results
Prikaži crtež s dimenzijama
Oznaka
Inside Ø (mm)
Outside Ø (mm)
Bend radius min. (mm)
Burst pressure (bar)
6.2 mm
11.2 mm
60 mm
2,000 bar
Saznaj više
8 mm
13.4 mm
85 mm
1,900 bar
Saznaj više
10 mm
15.7 mm
110 mm
1,900 bar
Saznaj više
12.2 mm
18.8 mm
150 mm
1,800 bar
Saznaj više
15.1 mm
21.6 mm
175 mm
1,600 bar
Saznaj više
20.2 mm
27.8 mm
200 mm
1,200 bar
Saznaj više
24.2 mm
31.7 mm
240 mm
1,100 bar
Saznaj više
31.9 mm
39.3 mm
280 mm
1,000 bar
Saznaj više

Column selection

Inside Ø (mm)
Outside Ø (mm)
Bend radius min. (mm)
Burst pressure (bar)
Test pressure (bar)
Weight per m (kg)
Working pressure 20 °C (stat.) (bar)