The product image may differ
Inside Ø
10 mm
Outside Ø
15.7 mm
Bend radius min.
110 mm
Detalji proizvoda za
KTF 310
Inside Ø
10 mm
Outside Ø
15.7 mm
Bend radius min.
110 mm
Burst pressure
1,900 bar
Test pressure
712.5 bar
Weight per m
0.442 kg
Working pressure 20 °C (stat.)
475 bar
Sva svojstva
Svojstva
Application
- high-pressure applications with different media, 2-component glue and aggressive media
Application
- mainly for the adhesive industry, surface treatment, heater hose systems.
Approval
- The base material has an FDA-approval, EG 1935/2004 and EU 10/2011.
Braiding
- two-braided of steel wire, bronzed, one layer of steel wire galvanised
Design
- smooth inliner in white PTFE
- thick-walled
Features
- smooth inner liner
Hose material
- PTFE (Polytetrafluoroethylene)
Temp.
- applies only to the hose
Temp. max.
- 200 °C
Temp. min.
- -70 °C
Sva svojstva
Opis proizvoda
Napomene
The pressure reduction factor must be taken into account from 50 °C.
(Max. working pressure = working pressure x factor)
Temp.: 100 °C / 150 °C / 200 °C
Factor: 0.95 / 0.90 / 0.83
If the hose assembly is being used as steam hose, the maximum operating pressure is 14 bar (203 psi) and the temperature +250 °C (+482 °F)
Temperature correction factors water vapour:
Temp.: 20 °C / 100 °C / 150 °C / 200 °C
Factor: 1.0 / 0.95 / 0.90 / 0.83.
With dynamic load the bend radius should be doubled at minimum. The radius should be adapted according to the conditions.
KTF-hoses do not have a cover and wires are not corrosion-protected. The usage as a sole hose assembly without measures, which excludes corrosion of the wires, is not permitted due to possible risk of injuries and can lead to failure of the hose assembly.
Napomena za porudžbinu
Product variants
8 Results
Search
Prikaz crteža s dimenzijama
Opis
Column selection
Inside Ø (mm)
Outside Ø (mm)
Bend radius min. (mm)
Burst pressure (bar)
Test pressure (bar)
Weight per m (kg)
Working pressure 20 °C (stat.) (bar)